Various accessories

The T2-50,8mm photographic adapter connects to all cameras and accessories with female T2 (M42x0,75) thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 39mm free aperture so it does not create...

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 50mm diameter telescopes can be easily...

If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 80mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 60mm diameter refractors. Like all the other elements of the PLUS...

DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.

OnAxisLock 50,8mm visual back for SC telescopes with 3,3" thread is screwed directly onto the rear thread present in Celestron C11, C14 or EdgeHD 925, 1100, 1400 telescopes and lets you use all the 50.8mm diameter accessories. OnAxisLock is the accessories locking system that, compared to the one using normal screw, offers a greater clamping force,...

OnAxisLock 50,8mm eyepiece holder for Takahashi (M72x1 thread) replaces the traditional eyepiece holder and lets you use all the 50.8mm diameter accessories. OnAxisLock is the accessories locking system that, compared to the one using normal screw, offers a greater clamping force, avoiding any possible flexure (so it's perfect for astrophotography), it...

The Nikon M48 ring is one of the most important accessories that you need to record astrophotos with Nikon DSLR. In fact, this accessory converts the Nikon bayonet in a 48 thread (48x0,75 female) allowing you to connect a variety of accessories such as photographic adapters, field flatteners or focal reducers.

The Canon EOS M48 ring is one of the most important accessories that you need to record astrophotos with Canon EOS DSLR. In fact, this accessory converts the Canon EOS bayonet in a 48 thread (48x0,75 female) allowing you to connect a variety of accessories such as photographic adapters, field flatteners or focal reducers.

OnAxisLock 31,8mm eyepiece holder fits into 50,8mm connection like the ones of the most common focusers. OnAxisLock is the accessories locking system that, compared to those using normal screw, offers a greater clamping force, avoiding any possible flexure (so it's perfect for astrophotography), it does not damage the connected accessory and it perfectly...

OnAxisLock 50,8mm visual back for SC telescopes is screwed directly onto the rear thread present in most of Schmidt-Cassegrain telescopes (like the SC and EdgeHD by Celestron or Meade ones) and lets you use all the 50.8mm diameter accessories. OnAxisLock is the accessories locking system that, compared to the one using normal screw, offers a greater...

The M48-50,8mm photographic adapter connects to all cameras and accessories with female M48x0,75 thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 44mm free aperture so it does not create any...

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 60mm diameter telescopes can be easily...

If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 115mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 80mm diameter refractors. Like all the other elements of the PLUS...

M48 female to T2 male adapter allows you to connect accessories with M48 thread (48x0.75 male) to those with T2 thread (42x0,75 female). In fact sometimes the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very thin...

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 80mm diameter telescopes can be easily...

60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...

The M48 male to T2 female adapter allows you to connect accessories with M48 thread (48x0.75 female) to those with T2 thread (42x0,75 male). Sometimes in fact the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very...

Autoguide package composed by PLUS 80mm guide rings, 60mm CompactGuide scope and QHY5L-II mono guide camera. This package is the perfect solution for those searching for everything needed to start autoguiding telescope during long astrophotography exposures. It includes everything you need for the guide and it's perfect for installation in parallel to...

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 100mm diameter telescopes can be...

PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 120mm diameter telescopes can be easily...

PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 150mm diameter telescopes can be easily...

PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...