Close

You’re shopping from: United States of America

DX finder base|Optical finders|Primalucelab en

FREE SHIPPING in most EU countries for order at least €299

DX finder base

PLLBACEDX

DX finder base can be installed on many telescopes to let you install finder supports from many brands.

The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.

Availability: Not available

€29.00
Tax included

If you pay by bank transfer 28,29 €


 

DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.

DX finder base

DX finder base (with finder) installed on support to connect ESATTO to the SkyWatcher EVOSTAR 80 ED telescope.

Basetta cercatore DX

Reviews

No reviews

More about this product:

You might also like

60mm CompactGuide scope with PLUS 80mm guide rings|Guiding systems|Primalucelab en
In Stock
Guiding systems

60mm CompactGuide scope with PLUS 80mm guide rings

PLLCG60
€185.00

If you pay by bank transfer 28,29 €

1 Reviews
60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...
Guide scope support for ECCO|ECCO|Primalucelab en
In Stock
ECCO

Guide scope support for ECCO

ECCOSUP
€79.00

If you pay by bank transfer 28,29 €

Be the first to review this product
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
ECCO2, environmental computerized controller for EAGLE|ECCO|Primalucelab en
In Stock
ECCO

ECCO2, environmental computerized controller for EAGLE

PrimaLuceLab
ECCO2
€195.00

If you pay by bank transfer 28,29 €

Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
Guide rings support plate for ECCO|ECCO|Primalucelab en
In Stock
ECCO

Guide rings support plate for ECCO

ECCOSUP-PL
€23.00

If you pay by bank transfer 28,29 €

Be the first to review this product
The "Guide rings support plate for ECCO" allows you to install the "60mm CompactGuide scope with PLUS 80mm guide rings" (PLLCG60) on the ECCO on a standard Vixen style finder shoe. This way you can use the guide scope with an autoguide camera or also with an eyepiece as an optical finder.
EAGLE6 computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 computer for telescopes and astrophotography

EAGLE6
€1,295.00

If you pay by bank transfer 28,29 €

Be the first to review this product
EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...