Close

You’re shopping from: United States of America

Flexible bushing for SESTO SENSO 2|Spare parts|Primalucelab en

FREE SHIPPING in most EU countries for order at least €299

Flexible bushing for SESTO SENSO 2

PL3600119

This flexible bushing connects the SESTO SENSO 2 motor to one of the red, black, blue, green, grey or yellow bushings for different focusers. This flexible bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This flexible bushing is not compatible with SESTO SENSO first generation.

Availability: In Stock


€19.00
Tax included

If you pay by bank transfer 18,53 €

 

This flexible bushing connects the SESTO SENSO 2 motor to one of the red, black, blue, green, grey or yellow bushings for different focusers. This flexible bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This flexible bushing is not compatible with SESTO SENSO first generation.

New

Reviews

No reviews

Customers who bought this product also bought:

Temperature sensor for ECCO, SESTO SENSO and ESATTO|ESATTO 2"|Primalucelab en
In Stock
ECCO

Temperature sensor for ECCO, SESTO SENSO and ESATTO

SESTOSENSO-TEMP
€25.00

If you pay by bank transfer 18,53 €

Be the first to review this product
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
Blue color bushing for SESTO SENSO 2|Spare parts|Primalucelab en
In Stock
Spare parts

Blue color bushing for SESTO SENSO 2

PL3600116C
€9.00

If you pay by bank transfer 18,53 €

Be the first to review this product
This blue color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.4mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
Yellow color bushing for SESTO SENSO 2|Spare parts|Primalucelab en
In Stock
Spare parts

Yellow color bushing for SESTO SENSO 2

PL3600116F
€9.00

If you pay by bank transfer 18,53 €

Be the first to review this product
This yellow color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 4.0mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
Losmandy style dovetail plate 495mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 495mm PLUS

PLLLOS495P
€109.00

If you pay by bank transfer 18,53 €

1 Reviews
The Losmandy style dovetail plate 495mm PLUS is designed to let you install your telescopes on mounts with this connection. This dovetail plate is 495mm long and is useful for installing large dimensions telescopes (such as Newton up to 300mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...
PLUS dovetail clamp with 1 Kg counterweight|Dovetail clamp|Primalucelab en
  • Pack
In Stock
Dovetail clamps

PLUS dovetail clamp with 1 Kg counterweight

PLL-CONTRPLUS-M_
€113.00

If you pay by bank transfer 18,53 €

Be the first to review this product
The dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard.
PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8"|Spacers and curved blocks|Primaluc
In Stock
Spacers and curved blocks

PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and...

PLLSAG925
€69.00

If you pay by bank transfer 18,53 €

1 Reviews
If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm...
Dew heater for 200mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 200mm diameter telescopes

PLLFAS200
€89.00

If you pay by bank transfer 18,53 €

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 200mm diameter telescopes can be easily...
60mm CompactGuide scope with PLUS 80mm guide rings|Guiding systems|Primalucelab en
In Stock
Guiding systems

60mm CompactGuide scope with PLUS 80mm guide rings

PLLCG60
€185.00

If you pay by bank transfer 18,53 €

1 Reviews
60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...
PLUS 30mm spacers|Spacers and curved blocks|Primalucelab en
In Stock
Spacers and curved blocks

PLUS 30mm spacers

PLLSPES30
€47.00

If you pay by bank transfer 18,53 €

Be the first to review this product
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 30mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...
Red color bushing for SESTO SENSO 2|Spare parts|Primalucelab en
In Stock
Spare parts

Red color bushing for SESTO SENSO 2

PL3600116A
€9.00

If you pay by bank transfer 18,53 €

Be the first to review this product
This red color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.5mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.