Close

You’re shopping from: United States of America

Best sellers

40mm extension tube for ESATTO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

40mm extension tube for ESATTO 3"

PL3600317
€125.00
Be the first to review this product
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 40mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...
Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4|ESATTO 4”|Primalucelab en
In Stock
ESATTO 4”

Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4

PL3600324
€165.00
Be the first to review this product
Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter has 35mm optical thickness and it is designed to have, when used together with ESATTO 4", the same thickness of the original focuser (100.5mm) in order to allow you to reach focus with the telescope. Not compatible...
9mm M48 extension|Photographic adapters|Primalucelab en
In Stock
Photographic adapters

9mm M48 extension

PL3304809
€29.00
Be the first to review this product
PrimaLuceLab M48 extensions are available in different lengths and they present on both sides of a M48 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...
Dew heater for 180mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 180mm diameter telescopes

PLLFAS180
€75.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 180mm diameter telescopes can be easily...
115mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

115mm PLUS support rings

PLLANSU115P
€269.00
Be the first to review this product
The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen...
EAGLE6 S computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 S computer for telescopes and astrophotography

EAGLE6S
€1,795.00
Be the first to review this product
EAGLE6 S is the more powerful version of the EAGLE6. With its i3 processor, 8 GB of fast RAM, a larger SSD (256 GB), and the addition of Thunderbolt interface (providing even higher-speed connectivity, up to 40 Gbps, for devices like high-speed storage if extra space is needed) to USB-C ports, EAGLE6 S delivers greater performance while maintaining low...
Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread|ESATTO 2" LP|Primalucelab en
In Stock
ESATTO 2" LP

Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread

PL3600539
€95.00
Be the first to review this product
Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 2" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO 2" LP has an optical thickness of 32mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 112mm of backfocus for your camera and accessories, also...
ESATTO 3,5" LP focuser with ARCO 3" rotator|ESATTO 3,5" LP|Primalucelab en
  • Pack
In Stock
ESATTO 3,5" LP

ESATTO 3,5" LP focuser with ARCO 3" rotator

PLLEST35LPARCO3
€2,585.00
Be the first to review this product
This bundle includes the ESATTO 3,5" LP low profile focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 58mm of thickness and 76.3mm of free aperture.
2" nosepiece for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

2" nosepiece for ARCO 2"

PL3600413
€49.00
Be the first to review this product
2" nosepiece for ARCO 2" allows you to connect rotator to focusers that come with 2" visual back and to control it through SESTO SENSO 2 installed on the same focuser.
Adapter from M81 to M72 with stop ring for ESATTO 3" and ARCO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

Adapter from M81 to M72 with stop ring for ESATTO 3" and ARCO 3"

PL3600272
€110.00
Be the first to review this product
Adapter from M81 to M72 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M72 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M72 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Adapter from M81 to M54 with stop ring for ESATTO 3" and ARCO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

Adapter from M81 to M54 with stop ring for ESATTO 3" and ARCO 3"

PL3600275
€110.00
Be the first to review this product
Adapter from M81 to M54 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M54 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Dew heater for 250mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 250mm diameter telescopes

PLLFAS250
€99.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 250mm diameter telescopes can be...
Dew heater for 200mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 200mm diameter telescopes

PLLFAS200
€89.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 200mm diameter telescopes can be easily...
Adapter from M98 to M68 with stop ring for ESATTO 3,5” LP|ESATTO 3,5" LP|Primalucelab en
In Stock
ESATTO 3,5" LP

Adapter from M98 to M68 with stop ring for ESATTO 3,5” LP

PL3600363
€125.00
Be the first to review this product
Adapter from M98 to M68 with stop ring for ESATTO 3,5" LP allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M98 thread of the ESATTO 3,5" LP draw tube. Thanks to the M68 stop ring for ESATTO 3,5" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
M110 35mm extension tube for ESATTO 4"|ESATTO 4”|Primalucelab en
In Stock
ESATTO 4”

M110 35mm extension tube for ESATTO 4"

PL3600325
€105.00
Be the first to review this product
The M110 35mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 35mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.
SESTO SENSO 2 37mm adapter|SESTO SENSO|Primalucelab en
In Stock
SESTO SENSO

SESTO SENSO 2 37mm adapter

SESTOSENSO-AD37II
€85.00
Be the first to review this product
This 37mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 37mm diameter shaft, like 3,5" FeatherTouch and FSQ-130 (or other focusers with a 37mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers with...
Side by side Losmandy plate 350mm PLUS large dovetail clamps|Side by side plates|Primalucelab en
  • Pack
In Stock
Side by side plates

Side by side Losmandy plate 350mm PLUS large dovetail clamps

PLLPDLOS350PL_
€379.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
GIOTTO 120 with ALTO-1 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
In Stock
GIOTTO+ALTO bundles

GIOTTO 120 with ALTO-1 telescope cover motor

PLLGIOTTO120ALTO1
€770.00
Be the first to review this product
This bundle includes GIOTTO 120 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
PLUS dovetail clamp with 1 Kg counterweight|Dovetail clamp|Primalucelab en
  • Pack
In Stock
Dovetail clamps

PLUS dovetail clamp with 1 Kg counterweight

PLL-CONTRPLUS-M_
€113.00
Be the first to review this product
The dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard.
Losmandy style dovetail plate 915mm PLUS|Dovetail bars|Primalucelab en
  • New
In Stock
Dovetail bars

Losmandy style dovetail plate 915mm PLUS

PLLLOS915P
€245.00
Be the first to review this product
The Losmandy style dovetail plate 915mm PLUS is designed to let you install your telescopes on mounts with Losmandy style dovetail clamp. Since this dovetail plate is 915mm long and thickness is 13mm like all our Losmandy style dovetail plates, we suggest to use it with optical tubes up to 30kg in weight. This 915mm PLUS Losmandy style dovetail plate can...
Adapter from M60 to M54 with stop ring for ESATTO 2” LP|ESATTO 2" LP|Primalucelab en
In Stock
ESATTO 2" LP

Adapter from M60 to M54 with stop ring for ESATTO 2” LP

PL3600547
€125.00
Be the first to review this product
Adapter from M60 to M54 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the M54 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
ESATTO 2" LP focuser with ARCO 2" rotator|ESATTO 2" LP|Primalucelab en
  • Pack
In Stock
ESATTO 2" LP

ESATTO 2" LP focuser with ARCO 2" rotator

PLLEST2LPARCO2
€1,665.00
Be the first to review this product
This bundle includes the ESATTO 2" LP low profile focuser, the ARCO 2" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 54.2mm of thickness and 50.9mm of free aperture.