Close

You’re shopping from: United States of America

Home

3% more discount if you pay with bank transfer - insert product in cart to get discount

Computer
Computer
Featured
Featured
Rotators
Rotators
Complete telescopes
Complete telescopes
Optical tubes
Optical tubes
Mounts
Mounts
Focusers
Focusers
Dovetail bars and rings
Dovetail bars and rings
Various accessories
Various accessories
Gift card
Gift card
Calibration
Calibration
Observatory Stations
Observatory Stations
Radio astronomy
Radio astronomy
Photo accessories
Photo accessories
Blue color bushing for SESTO SENSO 2|Spare parts|Primalucelab en
In Stock
Spare parts

Blue color bushing for SESTO SENSO 2

PL3600116C
€9.00
Be the first to review this product
This blue color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.4mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
C120 pier for concrete base|Tripods and piers|Primalucelab en
  • Pack
In Stock
Tripods and piers

C120 pier for concrete base

C120-C-B
€995.00
Be the first to review this product
C120 pier is the perfect solution to install even a large telescope in an astronomical observatory. The C120 pier has a high load capacity (150 kg) and, compared to a standard tripod, it provides high stability and needs for less space. A pier also prevent the telescope to touch the tripod legs during movements! This pier is available also with different...
M110 35mm extension tube for ESATTO 4"|ESATTO 4”|Primalucelab en
In Stock
ESATTO 4”

M110 35mm extension tube for ESATTO 4"

PL3600325
€105.00
Be the first to review this product
The M110 35mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 35mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.
M86x1 adapter for ARCO 3"|ARCO 3"|Primalucelab en
In Stock
ARCO 3"

M86x1 adapter for ARCO 3"

PL3600463
€69.00
Be the first to review this product
M86x1 adapter for ARCO 3" allows you to connect rotator to focusers or correctors that come with 86x1 female thread and to control it through SESTO SENSO 2 installed on the focuser.
M48x0.75 female adapter for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

M48x0.75 female adapter for ARCO 2"

PL3600424
€49.00
Be the first to review this product
M48x0.75 female adapter for ARCO 2" allows you to connect rotator to focusers or correctors that come with M48x0.75 male thread and to control it through SESTO SENSO 2 installed on the focuser. ​PL3600424 adapter adds 6.7mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600424) becomes 26.7mm.
M48 female to T2 male adapter|Photographic adapters|Primalucelab en
In Stock
Photographic adapters

M48 female to T2 male adapter

PL3304842
€22.00
Be the first to review this product
M48 female to T2 male adapter allows you to connect accessories with M48 thread (48x0.75 male) to those with T2 thread (42x0,75 female). In fact sometimes the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very thin...
M56 15mm extension tube for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
Not available
ESATTO 2"

M56 15mm extension tube for ESATTO 2" and ARCO 2"

PL3600286
€45.00
Be the first to review this product
The M56 15mm extension tube can be directly threaded to the ESATTO 2" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M56 extension tube has 15mm thickness, it's made up of aluminum, black anodized and it has a M56 female on the camera side this way you can connect all the ESATTO 2" camera adapters.
View
M81 25mm extension tube for ESATTO 3" and ARCO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

M81 25mm extension tube for ESATTO 3" and ARCO 3"

PL3600285
€59.00
Be the first to review this product
The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm thickness, it's made up of aluminum, black anodized and it has a M81 female on the camera side this way you can connect all the ESATTO 3" camera adapters.
SESTO SENSO 2 33mm adapter|SESTO SENSO|Primalucelab en
In Stock
SESTO SENSO

SESTO SENSO 2 33mm adapter

SESTOSENSO-AD33II
€76.00
Be the first to review this product
This 33mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 33mm diameter shaft, like 2,5" and 3" FeatherTouch focusers (or other focusers with a 33mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers...
GSO Ritchey-Chretien 203mm f/8, metal tube with ESATTO 2"|Ritchey-Chretien|Primalucelab en
  • Pack
Ritchey-Chretien

GSO Ritchey-Chretien 203mm f/8, metal tube with ESATTO 2"

GSRC8MEST2_
Be the first to review this product
GSO 203mm f/8 Ritchey-Chretien with metal tube is a great compact telescope for long exposure astrophotography and it uses and ESATTO 2" robotic microfocuser to perfectly focus also heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.
View
Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 3A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 3A port

PL1000044
€39.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and the SESTO...
Guide scope support for ECCO|ECCO|Primalucelab en
In Stock
ECCO

Guide scope support for ECCO

ECCOSUP
€79.00
Be the first to review this product
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
Dew heater for 80mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 80mm diameter telescopes

PLLFAS80
€59.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 80mm diameter telescopes can be easily...
EAGLE type connector for 3A power OUT ports|Spare parts|Primalucelab en
In Stock
EAGLE-type power cables

EAGLE type connector for 3A power OUT ports

PL1000036
€15.00
Be the first to review this product
EAGLE type connector for 3A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.
60mm CompactGuide scope with PLUS 80mm guide rings|Guiding systems|Primalucelab en
In Stock
Guiding systems

60mm CompactGuide scope with PLUS 80mm guide rings

PLLCG60
€185.00
1 Reviews
60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...
Side by side Losmandy plate 240mm PLUS|Side by side plates|Primalucelab en
  • Pack
In Stock
Side by side plates

Side by side Losmandy plate 240mm PLUS

PLLPDLOS240P_
€210.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
Maxi Dovetail Clamp Vixen+Losmandy PLUS|Dovetail clamp|Primalucelab en
In Stock
Dovetail clamps

Maxi Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLPM
€198.00
Be the first to review this product
The Maxi dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or to install it on the mounts instead of the original...
PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8"|Spacers and curved blocks|Primaluc
In Stock
Spacers and curved blocks

PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and...

PLLSAG925
€69.00
1 Reviews
If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm...
Vixen style dovetail plate 240mm PLUS|Dovetail bars|Primalucelab en
Not available
Dovetail bars

Vixen style dovetail plate 240mm PLUS

PLLVIX240P
€59.00
Be the first to review this product
The Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...
View
90mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

90mm PLUS support rings

PLLANSU90P
€225.00
1 Reviews
The 90mm PLUS support rings are designed for telescopes with tube approximately 90mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
NSGen-II noise generator for absolute calibration for SPIDER500|Accessories for radio telescopes|Primalucelab en
  • New
Not available
Accessories for radio telescopes

NSGen-II noise generator for absolute calibration for SPIDER500

NSGEN-II-5
€4,209.00
Be the first to review this product
NSGen radio telescope noise generator for absolute calibration is designed for SPIDERs and it can be used to calculate the flux in Jy of a radio source or sky area, by compensating atmospheric attenuation or any gain loss because of different factors (for example, antenna deformation because of its weight). The NSGen noise generator is installed on the...
View
EAGLE6 XTM computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 XTM computer for telescopes and astrophotography

EAGLE6XTM
€2,995.00
Be the first to review this product
EAGLE6 XTM is our most powerful computer ever for telescopes and astrophotography with blazing-fast i7 processor, Industrial Grade 32 GB fast DDR4 RAM memory, huge Industrial Grade 2TB SSD drive (NVMe) and Thunderbolt 4 connectivity for even higher speed, up to 40 Gbps, for devices like external storage memories. It's the perfect solution even for the...
DUAL-PRO Observatory...
  • New
Not available
Observatory Stations

DUAL-PRO Observatory Station with 3m dome

PLLDUALPRO1
Price starts at
€152,500.00
Be the first to review this product
DUAL-PRO is the Observatory Station with dome and dual telescope designed by PrimaLuceLab to provide a professional level but compact solution that can be used for many applications: remote space exploration, space situational awareness, astrophotography and astronomy education/outreach. DUAL-PRO includes a very high precision and load capacity alt-az...
View
2" visual back for ESATTO 2" LP|ESATTO 2" LP|Primalucelab en
In Stock
ESATTO 2" LP

2" visual back for ESATTO 2" LP

PL8410053
€95.00
Be the first to review this product
If you want to connect a camera with a 2" nosepiece to your ESATTO 2” LP, just connect the 2" visual back to the M60 thread of ESATTO 2” LP. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories. Optical thickness...
ALTO-3L telescope cover motor for GIOTTO 560mm|ALTO telescope cover motor|Primalucelab en
In Stock
ALTO telescope cover motor

ALTO-3L telescope cover motor for GIOTTO 560mm

PLLALTO3L
€995.00
Be the first to review this product
ALTO-3L is the telescope cover motor we designed to let you use GIOTTO 560mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows computer that you...
M110 10mm extension tube for ESATTO 4"|ESATTO 4”|Primalucelab en
In Stock
ESATTO 4”

M110 10mm extension tube for ESATTO 4"

PL3600376
€105.00
Be the first to review this product
The M110 10mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 10mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.
M56x1 male adapter for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

M56x1 male adapter for ARCO 2"

PL3600427
€49.00
Be the first to review this product
M56x1 male adapter for ARCO 2" allows you to connect rotator to focusers that come with M56x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. ​PL3600427 adapter adds 1mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600427) becomes 21mm.
GIOTTO 220 with ALTO-1 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
In Stock
GIOTTO+ALTO bundles

GIOTTO 220 with ALTO-1 telescope cover motor

PLLGIOTTO220ALTO1
€930.00
Be the first to review this product
This bundle includes GIOTTO 220 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
GIOTTO 185 Smart Flat Field Generator|GIOTTO flat field generators|Primalucelab en GIOTTO 185 Smart Flat Field Generator|GIOTTO flat field generators|Primalucelab en 2
In Stock
GIOTTO flat field generators

GIOTTO 185 Smart Flat Field Generator

PLLGIOTTO185
€365.00
Be the first to review this product
GIOTTO 185 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 185mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
3" visual back for ESATTO 3" and ARCO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

3" visual back for ESATTO 3" and ARCO 3"

PL8410010
€85.00
Be the first to review this product
If you want to connect a camera with a 3" nosepiece to your ESATTO 3" or ARCO 3", just connect the 3" visual back to the M81 thread of ESATTO 3" or ARCO 3" . This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories.
3" visual back for ESATTO 3,5” LP|ESATTO 3,5" LP|Primalucelab en
In Stock
ESATTO 3,5" LP

3" visual back for ESATTO 3,5” LP

PL8410011
€95.00
Be the first to review this product
If you want to connect a camera with a 3" nosepiece to your ESATTO 3,5” LP, just connect the 3" visual back to the M98 thread of ESATTO 3,5” LP. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories. Optical...
Observatory Dovetail Clamp Vixen+Losmandy PLUS|Dovetail clamp|Primalucelab en
In Stock
Dovetail clamps

Observatory Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLPO
€395.00
Be the first to review this product
The Observatory dovetail clamp Vixen+Losmandy PLUS is designed to support heavy telescopes that come with Vixen or Losmandy style dovetail bar. The Observatory version of PLUS dovetail clamps is 280mm long and it comes with 4 locking blocks to safely lock even large telescopes. The Observatory Dovetail Clamp Vixen+Losmandy PLUS is provided with threaded...
Green color bushing for SESTO SENSO 2|Spare parts|Primalucelab en
In Stock
Spare parts

Green color bushing for SESTO SENSO 2

PL3600116D
€9.00
Be the first to review this product
This green color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 3.5mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
ESATTO 2" robotic focuser|ESATTO 2"|Primalucelab en
  • Pack
In Stock
ESATTO 2"

ESATTO 2" robotic focuser

PLLEST2-B
€675.00
2 Reviews
ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...
Adapter ESATTO 3" for ARCO 3"|ARCO 3"|Primalucelab en
In Stock
ARCO 3"

Adapter ESATTO 3" for ARCO 3"

PL3600458
€95.00
Be the first to review this product
Adapter ESATTO 3" for ARCO 3" allows you to connect the rotator to ESATTO 3" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.
M48 male to T2 female adapter|Photographic adapters|Primalucelab en
In Stock
Photographic adapters

M48 male to T2 female adapter

PL3304248
€22.00
Be the first to review this product
The M48 male to T2 female adapter allows you to connect accessories with M48 thread (48x0.75 female) to those with T2 thread (42x0,75 male). Sometimes in fact the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very...