Close

You’re shopping from: United States of America

Eagle-compatible power cable for SkyWatcher EQ6-R and EQ8-R mounts - 115cm 8A|EAGLE-type power cables|Primalucelab en

FREE SHIPPING in most EU countries for order at least €299

Eagle-compatible power cable for SkyWatcher EQ6-R and EQ8-R mounts - 115cm 8A

PrimaLuceLab
PL1000056

The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the plug with screw to prevent being disconnected accidentally from the Eagle.

If the cable for your equipment is not present among the optional accessories, please contact us and we will build for you.

Pay in a single solution or over 3 installments of €15,00*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock

Delivery in 24-48 hours from shipment with express courier


€45.00
Tax included

If you pay by bank transfer 43,89 €

Pay in a single solution or over 3 installments of €15,00*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

 

The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the plug with screw to prevent being disconnected accidentally from the Eagle.

If the cable for your equipment is not present among the optional accessories, please contact us and we will build for you.

EAN code
8059020772826
Type
For AZ-EQ5 - AZ-EQ6, length 115cm (45 9⁄32 in)

Reviews

No reviews

Customers who bought this product also bought:

Dew heater for 250mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 250mm diameter telescopes

PLLFAS250
€99.00

If you pay by bank transfer 43,89 €

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 250mm diameter telescopes can be...
ARCO 2" camera rotator and field de-rotator|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

ARCO 2" camera rotator and field de-rotator

PLLARCO2
€695.00

If you pay by bank transfer 43,89 €

Be the first to review this product
ARCO 2" is the new low profile ARC second resolution rOtator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 2” version of ARCO has a thickness of only 20mm and a free aperture of 50.9mm. When used together with an equatorially mounted telescope, ARCO allows you to rotate the...
145mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

145mm PLUS support rings

PLLANSU145P
€345.00

If you pay by bank transfer 43,89 €

Be the first to review this product
The 145mm PLUS support rings are designed telescopes with tube approximately 145mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
SESTO SENSO 2 robotic focusing motor|SESTO SENSO|Primalucelab en
  • -€30.00
In Stock
SESTO SENSO

SESTO SENSO 2 robotic focusing motor

SESTOSENSOII
€239.00 €269.00

If you pay by bank transfer 43,89 €

8 Reviews
SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows® computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don’t want to focus using a computer, you can connect wirelessly from any...
65mm extension tube for ESATTO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

65mm extension tube for ESATTO 3"

PL3600284
€138.00

If you pay by bank transfer 43,89 €

Be the first to review this product
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 65mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...
Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread|ESATTO 2" LP|Primalucelab en
In Stock
ESATTO 2" LP

Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread

PL3600539
€95.00

If you pay by bank transfer 43,89 €

Be the first to review this product
Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 2" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO 2" LP has an optical thickness of 32mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 112mm of backfocus for your camera and accessories, also...
EAGLE6 XTM computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 XTM computer for telescopes and astrophotography

EAGLE6XTM
€2,995.00

If you pay by bank transfer 43,89 €

Be the first to review this product
EAGLE6 XTM is our most powerful computer ever for telescopes and astrophotography with blazing-fast i7 processor, Industrial Grade 32 GB fast DDR4 RAM memory, huge Industrial Grade 2TB SSD drive (NVMe) and Thunderbolt 4 connectivity for even higher speed, up to 40 Gbps, for devices like external storage memories. It's the perfect solution even for the...
Adapter from M56 to M48 with stop ring for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

Adapter from M56 to M48 with stop ring for ESATTO 2" and ARCO 2"

PL3600216
€95.00

If you pay by bank transfer 43,89 €

Be the first to review this product
M48x0.75 adapter for ESATTO 2" allows you to connect any camera or accessory with M48x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M48 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Eagle-compatible power Y cable for 3A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power Y cable for 3A port

PL1000047
€59.00

If you pay by bank transfer 43,89 €

Be the first to review this product
This "Eagle-compatible power Y cable for 3A port" connects to 3A 12V power out port of the EAGLE and provides you 2 power out ports (with 3A style connector). Just consider that, if you connect 2 devices to the same cable, the maximum provided current will be 3A (and not 6A).
Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 3A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 3A port

PL1000042
€39.00

If you pay by bank transfer 43,89 €

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like SkyWatcher EQ6, HEQ5 and EQ5,...