NEWS: new edition of "Explore the Universe through astrophotography: capturing pictures with telescopes and PLAY software" book
Close

You’re shopping from: United States of America

Best sellers

Adapter ESATTO 3" for Takahashi FSQ85|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

Adapter ESATTO 3" for Takahashi FSQ85

PL3600271
€95.00
Be the first to review this product
If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you can also connect your Takahashi accessories. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your...
Adapter from M81 to M48 with stop ring for ESATTO 3" and ARCO 3"|ESATTO 3”|Primalucelab en
  • Not available
Not available
ESATTO 3”

Adapter from M81 to M48 with stop ring for ESATTO 3" and ARCO 3"

PL3600277
€110.00
Be the first to review this product
Adapter from M81 to M48 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M48 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M48 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
View
131mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

131mm PLUS support rings

PLLANSU131P
€315.00
Be the first to review this product
The support rings PLUS 131mm can be used with different brands telescopes (for example refractors 100-130mm in diameter) with tube approximately 131mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED. Like...
PLUS dovetail clamp with 1 Kg counterweight|Dovetail clamp|Primalucelab en
  • Pack
In Stock
Dovetail clamps

PLUS dovetail clamp with 1 Kg counterweight

PLL-CONTRPLUS-M_
€113.00
Be the first to review this product
The dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard.
Dew heater for 180mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 180mm diameter telescopes

PLLFAS180
€75.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 180mm diameter telescopes can be easily...
SESTO SENSO 3 SC robotic...
  • New
In Stock
SESTO SENSO

SESTO SENSO 3 SC robotic focusing motor for SC type telescopes

SESTOSENSO3SC
€299.00
Be the first to review this product
SESTO SENSO 3 SC is the advanced robotic focusing motor specifically designed for Schmidt-Cassegrain, EdgeHD, RASA, and other telescopes with internal mirror focus systems. Developed and manufactured in Italy by PrimaLuceLab, it features key innovations such as the Direct Pulley Clamp (DPC) — a backlash-free, pulley-driven coupling that allows precise...
Adapter ESATTO 3,5” LP for telescopes with large 3.3" SC thread|ESATTO 3,5" LP|Primalucelab en
  • Not available
Not available
ESATTO 3,5" LP

Adapter ESATTO 3,5” LP for telescopes with large 3.3" SC thread

PL3600362
€95.00
Be the first to review this product
Adapter ESATTO 3,5” LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 3,5" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 32mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 112mm of backfocus for your camera and accessories, also when used together...
View
Adapter ESATTO 3" for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

Adapter ESATTO 3" for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches

PL3600236
€125.00
Be the first to review this product
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and cabron tubes) for astrophotography, this adapter allows you to connect ESATTO 3" to the M117 thread of these telescope. Optical thickness of the "PL3600236" adapter is 43mm so, when you add the ESATTO 3"...
Eagle-compatible power Y cable for 3A port|EAGLE-type power cables|Primalucelab en
In Stock
EAGLE-type power cables

Eagle-compatible power Y cable for 3A port

PL1000047
€59.00
Be the first to review this product
This "Eagle-compatible power Y cable for 3A port" connects to 3A 12V power out port of the EAGLE and provides you 2 power out ports (with 3A style connector). Just consider that, if you connect 2 devices to the same cable, the maximum provided current will be 3A (and not 6A).
Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 3A port|EAGLE-type power cables|Primalucelab
  • Not available
Not available
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 3A...

PL1000017
€49.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...
View
40mm extension tube for ESATTO 3"|ESATTO 3”|Primalucelab en
In Stock
ESATTO 3”

40mm extension tube for ESATTO 3"

PL3600317
€125.00
Be the first to review this product
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 40mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...