Close

You’re shopping from: United States of America

  • Pack
Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6|Dovetail clamp|Primalucelab en

FREE SHIPPING in most EU countries for order at least €299

Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6

PLLMORVLPB-EQ6_

The big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the EQ6 type mount.

Thus you will have a better connection than the original EQ6 or N-EQ6 offering greater stability and more comfortable and large knobs for a secure closure of the telescope.

Pay in a single solution or over 3 installments of €63,33*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.
Availability: In Stock


€190.00
Tax included

If you pay by bank transfer 185,33 €

Pay in a single solution or over 3 installments of €63,33*
* Pay in 3 installments is a service offered by Paypal, if available in your state. You can select to pay in 3 installments in Paypal.

Composed of

 

The big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the EQ6 type mount.

Thus you will have a better connection than the original EQ6 or N-EQ6 offering greater stability and more comfortable and large knobs for a secure closure of the telescope.

 

Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6

 

 

Losmandy® is registered trademark of Hollywood General Machining, Inc.

Reviews

No reviews

Customers who bought this product also bought:

Counterweight PLUS 1Kg|Other accessories for mounts|Primalucelab en
In Stock
Other accessories for mounts

Counterweight PLUS 1Kg

PLL-CONTRPLUS
€45.00

If you pay by bank transfer 185,33 €

Be the first to review this product
This 1 Kg counterweight allow easier balance of the optical tubes . It can be installed both side, on the front or rear optics of any instrument. ​Dimensions: 65x60mm, 35mm thickness.
Dew heater for 150mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 150mm diameter telescopes

PLLFAS150
€69.00

If you pay by bank transfer 185,33 €

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 150mm diameter telescopes can be easily...
Temperature sensor for ECCO, SESTO SENSO and ESATTO|ESATTO 2"|Primalucelab en
In Stock
ECCO

Temperature sensor for ECCO, SESTO SENSO and ESATTO

SESTOSENSO-TEMP
€25.00

If you pay by bank transfer 185,33 €

Be the first to review this product
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
Adapter from M56 to M54 with stop ring for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
In Stock
ESATTO 2"

Adapter from M56 to M54 with stop ring for ESATTO 2" and ARCO 2"

PL3600242
€95.00

If you pay by bank transfer 185,33 €

Be the first to review this product
Adapter from M56 to M54 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M54x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M54 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
Losmandy style dovetail plate 350mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 350mm PLUS

PLLLOS350P
€89.00

If you pay by bank transfer 185,33 €

Be the first to review this product
The Losmandy style dovetail plate 350mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 350mm long and is useful for installing medium dimensions telescopes (such as refractors up to 120mm and Newton up to 250mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the...
Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11 e RASA 8|Dovetail bars|Primalucelab en
  • Pack
In Stock
Dovetail bars

Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11...

PLLLOS495SAG925_
€178.00

If you pay by bank transfer 185,33 €

Be the first to review this product
This kit, composed of plate 495mm Losmandy style PLUS dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the C9.25 or C11 Schmidt-Cassegrain or EdgeHD 925 and 1100 aplanatic Schmidt-Cassegrain telescopes by Celestron.
Vixen style dovetail plate 90mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Vixen style dovetail plate 90mm PLUS

PLLVIX90P
€34.00

If you pay by bank transfer 185,33 €

Be the first to review this product
The Vixen style dovetail plate 90mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 90mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...
Losmandy style dovetail plate 495mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 495mm PLUS

PLLLOS495P
€109.00

If you pay by bank transfer 185,33 €

1 Reviews
The Losmandy style dovetail plate 495mm PLUS is designed to let you install your telescopes on mounts with this connection. This dovetail plate is 495mm long and is useful for installing large dimensions telescopes (such as Newton up to 300mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...
Losmandy style dovetail plate 240mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 240mm PLUS

PLLLOS240P
€74.00

If you pay by bank transfer 185,33 €

Be the first to review this product
The Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all...
Losmandy style dovetail plate 140mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 140mm PLUS

PLLLOS140P
€49.00

If you pay by bank transfer 185,33 €

1 Reviews
The Losmandy style dovetail plate 140mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 140mm long and is useful for installing compact telescopes (as refractors up to 100mm in diameter) on mounts with Losmandy plate (as the SkyWatcher SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...

You might also like

Vixen style dovetail plate 240mm PLUS|Dovetail bars|Primalucelab en
  • Not available
Not available
Dovetail bars

Vixen style dovetail plate 240mm PLUS

PLLVIX240P
€59.00

If you pay by bank transfer 185,33 €

Be the first to review this product
The Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...
View
Losmandy style dovetail plate 240mm PLUS|Dovetail bars|Primalucelab en
In Stock
Dovetail bars

Losmandy style dovetail plate 240mm PLUS

PLLLOS240P
€74.00

If you pay by bank transfer 185,33 €

Be the first to review this product
The Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all...
Big Dovetail Clamp Vixen+Losmandy PLUS|Dovetail clamp|Primalucelab en
In Stock
Dovetail clamps

Big Dovetail Clamp Vixen+Losmandy PLUS

PrimaLuceLab
PLLMORVLPB
€145.00

If you pay by bank transfer 185,33 €

1 Reviews
The big dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or give the possibility to assemble the Losmandy...
EAGLE6 computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
In Stock
EAGLE

EAGLE6 computer for telescopes and astrophotography

EAGLE6
€1,295.00

If you pay by bank transfer 185,33 €

Be the first to review this product
EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...