Close

You’re shopping from: United States of America

Best sellers

Side by side Losmandy plate...
  • Pack
In Stock
Side by side plates

Side by side Losmandy plate 240mm PLUS

PLLPDLOS240P_
€210.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
Side by side Losmandy plate...
  • Pack
In Stock
Side by side plates

Side by side Losmandy plate 495mm PLUS maxi dovetail clamps

PLLPDLOS495PM_
€505.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
Eagle-compatible power...
In Stock
EAGLE-type power cables

Eagle-compatible power cable for FLI camera - 115cm 8A

PrimaLuceLab
PL1000002
€89.00
Be the first to review this product
The EAGLE control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally from the EAGLE.
Dew heater for 300mm...
In Stock
Dew heaters

Dew heater for 300mm diameter telescopes

PrimaLuceLab
PLLFAS300
€109.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 300mm diameter telescopes can be easily...
GIOTTO for Origin, Smart...
  • New
Not available
GIOTTO flat field generators

GIOTTO for Origin, Smart Flat Field Generator

PLLGIOTTORG6
€325.00
Be the first to review this product
GIOTTO for Origin is an intelligent flat field generator specifically designed for Celestron Origin telescopes, enabling precise flat field calibration with the smart telescope. This ensures that if you rotate the Origin camera to better frame your target, or when new cameras become available in the future, you can easily capture a new flat-frame image....
View
Eagle-compatible power...
In Stock
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A...

PL1000037
€49.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...
GIOTTO 285 with ALTO-2...
  • Pack
In Stock
GIOTTO+ALTO bundles

GIOTTO 285 with ALTO-2 telescope cover motor

PLLGIOTTO285ALTO2
€1,290.00
Be the first to review this product
This bundle includes GIOTTO 285 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
Adapter ESATTO 4" for ARCO...
In Stock
ARCO 3"

Adapter ESATTO 4" for ARCO 3", only for FSQ106

PL3600469
€145.00
Be the first to review this product
In order to prevent the ARCO 3" rotator to touch the internal field flattener of FSQ-106 telescope, we designed this special version of adapter that allows you to connect the ARCO 3" rotator to ESATTO 4" focuser, when installed on the FSQ-106. This adapter optical thickness is 10,5mm so, by adding it to ARCO 3", rotator optical thickness becomes 33,5mm....
GIOTTO 320 with ALTO-2...
  • Pack
In Stock
GIOTTO+ALTO bundles

GIOTTO 320 with ALTO-2 telescope cover motor

PLLGIOTTO320ALTO2
€1,590.00
Be the first to review this product
This bundle includes GIOTTO 320 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
3" visual back for ESATTO...
In Stock
ESATTO 3,5" LP

3" visual back for ESATTO 3,5” LP

PL8410011
€95.00
Be the first to review this product
If you want to connect a camera with a 3" nosepiece to your ESATTO 3,5” LP, just connect the 3" visual back to the M98 thread of ESATTO 3,5” LP. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories. Optical...
ESATTO 4" focuser with ARCO...
  • Pack
In Stock
ESATTO 4”

ESATTO 4" focuser with ARCO 3" rotator

PLLEST4ARCO3
€2,835.00
Be the first to review this product
This bundle includes the ESATTO 4" focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 93.0mm of thickness and 76.3mm of free aperture.
M48-50,8mm photographic...
In Stock
Photographic adapters

M48-50,8mm photographic adapter

PrimaLuceLab
PL3304826
€24.00
Be the first to review this product
The M48-50,8mm photographic adapter connects to all cameras and accessories with female M48x0,75 thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 44mm free aperture so it does not create any...