Close

You’re shopping from: United States of America

Best sellers

3" visual back for ESATTO 3,5” LP|ESATTO 3,5" LP|Primalucelab en
In Stock
ESATTO 3,5" LP

3" visual back for ESATTO 3,5” LP

PL8410011
€95.00
Be the first to review this product
If you want to connect a camera with a 3" nosepiece to your ESATTO 3,5” LP, just connect the 3" visual back to the M98 thread of ESATTO 3,5” LP. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories. Optical...
7mm T2 extension|Photographic adapters|Primalucelab en
In Stock
Photographic adapters

7mm T2 extension

PL3304207
€19.00
Be the first to review this product
PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...
Side by side Losmandy plate 240mm PLUS|Side by side plates|Primalucelab en
  • Pack
In Stock
Side by side plates

Side by side Losmandy plate 240mm PLUS

PLLPDLOS240P_
€210.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
Side by side Losmandy plate 495mm PLUS maxi dovetail clamps|Side by side plates|Primalucelab en
  • Pack
In Stock
Side by side plates

Side by side Losmandy plate 495mm PLUS maxi dovetail clamps

PLLPDLOS495PM_
€505.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
180mm PLUS support rings|Support rings|Primalucelab en
In Stock
Support rings

180mm PLUS support rings

PLLANSU180P
€390.00
Be the first to review this product
The 180mm PLUS support rings can be used with telescopes that have 180mm diameter tube like Takahashi TOA150 to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...
Dew heater for 300mm diameter telescopes|Dew heaters|Primalucelab en
In Stock
Dew heaters

Dew heater for 300mm diameter telescopes

PLLFAS300
€109.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 300mm diameter telescopes can be easily...
EAGLE EYE lens cap|Spare parts|Primalucelab en
In Stock
Spare parts

EAGLE EYE lens cap

PL3600099
€3.00
Be the first to review this product
EAGLE EYE lens cap protects lens of EYE sensor when not in use.
M56x1 male adapter for ARCO 2"|ARCO 2"|Primalucelab en
In Stock
ARCO 2"

M56x1 male adapter for ARCO 2"

PL3600427
€49.00
Be the first to review this product
M56x1 male adapter for ARCO 2" allows you to connect rotator to focusers that come with M56x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. ​PL3600427 adapter adds 1mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600427) becomes 21mm.
Adapter ESATTO 3,5” LP for ARCO 3"|ARCO 3"|Primalucelab en
In Stock
ARCO 3"

Adapter ESATTO 3,5” LP for ARCO 3"

PL3600467
€95.00
Be the first to review this product
Adapter ESATTO 3,5” LP for ARCO 3" allows you to connect the rotator to ESATTO 3,5" LP low profile focuser and control it through the special port on ESATTO. By adding this adapter (that has an optical thickness of 3mm) to ARCO 3", thickness of rotator becomes 26mm.
ESATTO 4" focuser with ARCO 3" rotator|ESATTO 4”|Primalucelab en
  • Pack
In Stock
ESATTO 4”

ESATTO 4" focuser with ARCO 3" rotator

PLLEST4ARCO3
€2,835.00
Be the first to review this product
This bundle includes the ESATTO 4" focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 93.0mm of thickness and 76.3mm of free aperture.
M48-50,8mm photographic adapter|Photographic adapters|Primalucelab en
  • Not available
Not available
Photographic adapters

M48-50,8mm photographic adapter

PL3304826
€24.00
Be the first to review this product
The M48-50,8mm photographic adapter connects to all cameras and accessories with female M48x0,75 thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 44mm free aperture so it does not create any...
View
Adapter from M110 to M98 with stop ring for ESATTO 4"|ESATTO 4”|Primalucelab en
In Stock
ESATTO 4”

Adapter from M110 to M98 with stop ring for ESATTO 4"

PL3600322
€195.00
Be the first to review this product
Adapter from M110 to M98 with stop ring for ESATTO 4" allows you to connect any camera or accessory with M98 female thread. Just thread this adapter to the M110 thread of the ESATTO 4" draw tube. Thanks to the M98 stop ring for ESATTO 4" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.