• New
  • Pack
SBIG STC-7 with built-in filter wheel

FREE SHIPPING in most EU countries for order at least €299

SBIG STC-7 with built-in filter wheel

SBIG
STC-7-EU-B
Take stunning astrophotos with this all-inclusive imaging package. The SBIG STC-7 features an ultra-sensitive and low noise 7 megapixel cooled CMOS sensor, integrated 8 position filter wheel, plus a complete set of LRGB and narrowband filters, and an opaque filter for convenience in making dark frames. You can easily connect the STC-7 to your telescope via either the front T-Thread mount or the included 2″ focuser adapter. The integrated filter wheel design ensures minimal back-focus distance for maximum compatibility. The STC-7 package also includes MaxIm LT for Windows – all the software you need to take images, calibrate, stack, and do essential image processing. Other software is supported via included ASCOM drivers. Mac OS and Linux drivers are also available. For even better results, the STC-7 is compatible with our SBIG StarChaser SC-2 off-axis guide camera. The StarChaser also supports the SBIG AO-8A adaptive optics accessory, which helps you get pinpoint star images.
Availability: Order
€3,385.25

If you pay by bank transfer 3.283,69 €

Composed of

1x
SBIG STC-7 with built-in filter wheel
€3,385.25

Optional accessories

SBIG adaptive optics AO-8A for Aluma and STF
SBIG adaptive optics AO-8A for Aluma and STF
€769.67 Order
SBIG StarChaser SC-2 Off-Axis Guider with guide camera
SBIG StarChaser SC-2 Off-Axis Guider with guide camera
€967.21 Order

 

STC-7 highlights

  • High sensitivity, low noise 7 megapixel IMX428 imaging sensor
  • Electronic global shutter for fast exposure times (0.001 to 3600 sec.)
  • High-speed USB 3.0 interface (USB 2.0 compatible)
  • Downloads in under 50 milliseconds (depending on computer speed)
  • Stack Pro™ automatic in-camera sub-exposure stacking
  • Regulated two-stage cooling with delta ~ -30C
  • SmartCooling™ active temperature regulation to 0.1 degrees C for high calibration stability
  • Integrated 8-Position Filter Wheel with LRGB + Halpha, OIII, and SII filters, plus an opaque filter for dark frames
  • Compatible with SBIG StarChaser SC-2 off-axis guiding camera
  • Supports AO-8A adaptive optics unit via StarChaser SC-2
  • MaxIm LT control software
  • Multiplatform software API and sample code available

 

Third-Generation CMOS image sensor

The STC-7 represents a major step forward in imaging technology, utilising the SONY IMX-428 CMOS imaging sensor. Compared to CCD cameras with 8300 sensor, the STC-7 has higher sensitivity, lower read noise, and much faster readout. It produces extremely clean images with few hot pixels. Due to the extremely low read noise and fast readout, the STC-7 is best used with shorter sub-exposures than for comparable CCD cameras. A typical sub-exposure will be only 30-60 seconds, versus 5-10 minutes, while still achieving the same or better noise performance and overall dynamic range after stacking. This has many advantages including the ability to take unguided exposures without trailing. It can also be used for lunar and planetary imaging at high resolution, given its high sensitivity, wide exposure range, and fast readout. The STC-7 is compatible with most common telescopes, such as those having a focal length of 600 to 2500 mm. The camera’s pixel size is optimal for scopes from 1000 to 1600mm under good seeing conditions. Common refractors and small SCT scopes with focal reducer/field flatteners are well suited. Longer focal lengths can be used for lunar and planetary imaging.

 

SBIG STC-7 con ruota portafiltri integrata

 

Stack Pro™

The STC-7 scientific CMOS camera features Stack Pro™, a revolutionary feature that performs image stacking inside the camera. While the IMX428 sensor has dynamic range on a par with its CCD predecessor, it is limited to 12 bit data (0-4095). At the same time it also has far lower read noise, which means you can stack many more shorter exposures without degrading signal-to-noise ratio. As great as this sounds it does result in a lot of extra disk usage and post-processing. Stack Pro™ performs the stacking automatically, inside the camera. It automatically subdivides your exposure into up to 16 individual sub-exposures, and stacks them inside the camera prior to download. This eliminates the excessive amounts of data cluttering up your hard drive.

 

SBIG STC-7 con ruota portafiltri integrata

 

Included Optical Filters

The included 25.4mm filters are parfocal, and include:

  • Luminance (L)
  • Red (R)
  • Green (G)
  • Blue (B)
  • Hydrogen Alpha (Ha) – 656.3 nm, bandwidth 6.5 nm
  • Sulphur II (SII) – 672.4 nm, bandwidth 6.5 nm
  • Oxygen III (OIII) – 500.7 nm, bandwidth 6.5 nm
  • Opaque “filter” (anodized aluminum) for dark frames
Power requirements
External 12V 4A
Porta autoguida ST4
No
Type
Camera CMOS raffreddata
Peso (gr)
1kg
Backfocus (mm)
25,6mm
Telescope interface
Filetto T femmina (42x0,75)
A/D converter
12 bit
Sensor diagonal (mm)
17.9
Sensor dimensions (mm)
14.4 mm X 9.9 mm
Connection to PC
USB 3.0
Pixels dimensions (µm)
4.5 x 4.5 micron
Cooling
-30°C rispetto a T ambientale
Resolution
3208 x 2200 pixels
Readout Noise (e-)
1.9 e- High Gain, 2.5 e- Med Gain, 5 e- Low Gain
Sensor
IMX428
Monochrome
New product
2021-05-18

Reviews

No reviews

Related products

This website requires cookies to provide all of its features. For more information on what data is contained in the cookies, please see our Privacy Policy page. To accept cookies from this site, please click the Allow button below.